Description
Nissan 350Z Front Drift Angle Lock Kit
Wisefab Nissan 350Z front suspension kit is about the same weight as original aluminium suspension. All the metal components on 350Z front suspension kit are from high strenght steel, including sheetmetal components, tubes, tube ends and rod end housings. Rod ends and spherical bearings are used, no rubber bushings. Lower control arms are one piece design with shock motion ratio. Nissan 350Z spare parts available right here. Scroll down and order your spare parts here.
Want to know how does Wisefab Lock kit fits your driftcar check below the link CHECK FITMENT or here!
Check out the Nissan 350Z Rear Suspension kit.
Here is our recommended alignment parameters:
Toe in/out: If Ackermann is 0 or negative then toe is 2mm out. If Ackermann is positive then toe is 0
Camber: -3,7 +/-0,3
Caster: 6,3 +/-0,3
Nissan 350Z Rear Suspension Drop Knuckle Kit
Wisefab Nissan 350Z Rear Suspension kit will give a good kinematics with lowered car – higher roll center, lowered antisquat, revised camber gain and bump steer for maximum grip. Built in anti-squat and camber adjustment. All the links are pre set by Wisefab. No need to change the lenghts. Easy to install and set up. Every nut and bolt is available for spare parts. Scroll down to order your spare parts here.
Check out the Nissan 350Z Angle kit.
Here is our recommended alignment parameters:
Toe in/out: 3-10mm toe in/per side
Camber: -0,5
Nissan 370Z Front Drift Angle Lock Kit
Wisefab Nissan 370Z front suspension kit is about the same weight as original aluminium suspension. Rod ends and spherical bearings are used, no rubber bushings. Adjustable Ackermann with washers. Lower control arms are one piece design and the shock motion ratio can be adjusted with out affecting the ride height. Nissan 370Z spare parts available right here. Scroll down and order your spare parts here.
Want to know how does Wisefab Lock kit fits your driftcar check below the link CHECK FITMENT or here!
Check out the Nissan 370Z Rear Suspension kit.
Here is our recommended alignment parameters:
Toe in/out: If Ackermann is 0 or negative then toe is 2mm out. If Ackermann is positive then toe is 0
Camber: -3,7 +/-0,3
Caster: 6,3 +/-0,3
Nissan 370Z Rear Suspension Drop Knuckle Kit
Nissan 370Z rear suspension with with convenient camber adjustment and bumpsteer correction. All the racing know how and experiance has put to this product. Kinematics have be revised for maximum performance on lowered car. Roll center has moved higher, camber gain has been revised. This rear suspension kit is the same weight as the OEM aluminium but much stronger.
Be sure to check out the Nissan 370Z Lock kit for a complite suspension upgrade.
